ASTM A182 F22 Flanges are made to ASTM A182 / ASME SA182 F22 Class 3 for high-temperature steam service. They are supplied in every common flange type and facing to ASME B16.5, B16.47 and the main EN, DIN, BS and JIS standards.
Raaj Fittings manufactures ASTM A182 F22 flanges in-house at our two plants in India, from ½" to 60" and in Class 150 to Class 2500, and exports them to EPC contractors, fabricators and stockists across the Middle East, Europe and the Americas, with full traceability and EN 10204 certificates.
| Material specification | ASTM A182 / ASME SA182 F22 Class 3 |
|---|---|
| Dimensional standards | ASME B16.5 (½" to 24"), ASME B16.47 Series A and B (26" to 60"), EN 1092-1, DIN, BS 4504, JIS B2220 |
| Pressure class | ASME Class 150, 300, 600, 900, 1500 and 2500; PN 6 to PN 400 |
| Facing | Raised Face (RF), Flat Face (FF), Ring Type Joint (RTJ), Male & Female, Tongue & Groove |
| Certification | EN 10204 3.1 mill test certificate as standard; EN 10204 3.2 on request |
ASTM A182 F22 is a 2¼% chromium, 1% molybdenum alloy steel with higher creep strength than F11. It is a standard material for high-temperature steam piping and for hydrogen service in refinery hydroprocessing units.
| Element, % | ASTM A182 F22 |
|---|---|
| Carbon (C) | 0.05 – 0.15 |
| Manganese (Mn) | 0.30 – 0.60 |
| Phosphorus (P) | 0.040 max |
| Sulphur (S) | 0.040 max |
| Silicon (Si) | 0.50 max |
| Chromium (Cr) | 2.00 – 2.50 |
| Nickel (Ni) | — |
| Molybdenum (Mo) | 0.87 – 1.13 |
| Property | ASTM A182 F22 |
|---|---|
| Tensile strength, min. | 515 MPa (75 ksi) |
| Yield strength, min. | 310 MPa (45 ksi) |
| UNS | Werkstoff Nr. | EN / DIN | Other |
|---|---|---|---|
| K21590 | 1.7380 | 10CrMo9-10 (comparable) | — |
ASTM A182 F22 flanges are supplied normalised and tempered (or annealed, as the specification allows) with hardness checked. Welding to chrome-moly pipe requires preheat, controlled interpass temperature and post-weld heat treatment.
Every heat is PMI-verified and its chemistry and mechanical properties are confirmed against the material specification before the flanges are released. Each piece is marked with grade, size, rating and heat number for traceability to its EN 10204 3.1 mill test certificate. EN 10204 3.2 certification and inspection by the buyer's nominated third-party agency are available on request, as are PED 2014/68/EU compliance for European projects and IBR certification for Indian boiler applications.
Heat treatment records and hardness results are reported for each heat.
Class 3 has higher minimum tensile and yield strength than Class 1. Class 3 is the grade most often specified for flanges and fittings in power and refinery piping.
We make ASTM A182 F22 Flanges from ½" to 24" to ASME B16.5 and from 26" to 60" to ASME B16.47 Series A and B, in Class 150 to 2500, and to EN 1092-1, DIN, BS and JIS standards in PN ratings.
Every order is supplied with EN 10204 3.1 mill test certificates showing heat chemistry and mechanical properties to ASTM A182 F22 Class 3. EN 10204 3.2 certification and inspection by your nominated third-party agency are available on request.