Stainless Steel 316L Pipe Fittings

  • Home /
  • Stainless Steel 316L Pipe Fittings

Manufacturer in India of EN 10253-2 SS316L Buttweld Elbow and ASTM A403 WP316L Tee


What is Stainless Steel 316L Pipe Fittings?
The low carbon variant of the stainless steel 316 material is known as stainless steel 316L. The Stainless Steel 316L Pipe Fittings are widely used and quite popular, just like the other fittings in the SS 300 series. They come in a variety of sorts, pressure ratings, and sizes that can be customised. Different standards and criteria may apply to the various types of stainless steel 316L pipe fittings.
There is less likelihood of carbide precipitate forming on the surface of the fittings since stainless steel 316L has a low carbon content. They have greater creep resistance and can work well in a variety of caustic situations. Additionally, the stainless steel 316L material is well-formed. The stainless steel 316L fittings are capable of withstanding intergranular corrosion and maintaining their strength even at temperatures below zero. They can work well in the petroleum sector because to this quality.

316L Stainless Steel Socket Weld Fittings Vs SA403 WP316L Buttweld Fittings
Before being fillet welded, the pipe is put through the socket of the 316L stainless steel socket weld fittings. The ends of SA403 WP316L Buttweld Fittings are directly welded to the pipes using customary welding techniques.
Because buttweld fittings are stronger than socket weld fittings, SA403 WP316L Buttweld Fittings are used in more demanding applications.
In comparison to buttweld fittings, socket weld fittings require less time and effort. The latter also requires highly skilled people.
The 316L Stainless Steel Socket Weld Fittings are more affordable than the SA403 WP316L Buttweld Fittings.

UNS S31603 Elbow Vs ASTM A403 WP316l Reducer
The UNS S31603 Elbow is a pipe fitting that aids in reversing the run pipe's flow. It may vary the flow depending on the supplied angle because it is accessible at 45 degrees and 90 degrees angles. The UNS S31603 Elbow comes in two varieties: the short radius elbow, whose radius of curvature is equal to the pipe's diameter, and the long radius elbow, whose radius of curvature is at least 1.5 times the pipe's diameter.
By reducing the pipe's size from a bigger to a smaller bore, ASTM A403 WP316l Reducer aids in controlling the pipe run's flow rate. Concentric reducers, which are frequently used because they are for vertical pipes, and eccentric reducers, which are used in horizontal pipes to keep the same top or bottom levels, are the two varieties of ASTM A403 WP316l Reducers that are available.

Stainless Steel 316L Tee Vs DIN 1.4404 Stub End
The Stainless Steel 316L Tee has one main connection line, two branches, and is shaped like the letter T. They are mostly employed for dividing or merging the flow. The tee also aids in controlling the pipe's flow velocity and flow direction. There are two sorts of tees: equal tees and unequal tees, depending on the size of the bore and the main connection line.
The DIN 1.4404 Stub End is a category of buttweld fittings that are used to create a flanged connection in a piping system using lap joint flanges. They may be a fantastic replacement for weld neck flanges.

What Is The Function Of 316l Stainless Steel End Cap?
The 316l Stainless Steel End Cap's main purpose is to safeguard the pipe's ends and other pipe fittings. They are therefore made to order to fit the size and shape of the pipeline. They are either positioned on the pipe's dead ends, where it is not in use, or they can assist in halting the flow of the run pipe. This makes pipeline repairs and maintenance simple.

If you choose a SS 316L Pipe Fittings manufacturers in India you can save 10-12% cost, Call Now and get a best quote!
Stainless Steel 316L Pipe Fittings

Stainless Steel 316L Pipe Fittings

By hiring an Indian producer of SS 316L pipe fittings, you can reduce prices by between 10 and 12 percent. To get a reasonable price, call right away!


Stainless Steel 316L Pipe Fittings Specifications ASTM A403
316L SS weld fittings Sizes ASTM A403 WP316L Seamless Fitting: 1/2" - 10"
ASME B16 9 316L SS Welded Fitting: 1/2" - 48"
stainless steel 316L fittings Dimensions ASME B16.28, ASME/ANSI B16.9, BS4504, MSS-SP-43, BS1560, BS4504, BS10
316L stainless weld fittings Thickness SCH30, SCH10, SCH 160, SCH20, SCH60, XS, STD SCH40, SCH 80, SCH 120, SCH 140, SCH 100, XXS available with NACE MR 01-75
Stainless Steel 316L Fitting Type Manufacturer DN15-DN1200
Stainless Steel 316L Weld Fittings Connection Welding
Bending Radius Provided By ASTM A403 WP316l Pipe Fittings Manufacturer R=1D, 3D, 2D, 5D, 8D, 6D, 10D or Custom
Size Range ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) Stainless steel 316L fitting
316L Stainless Steel Elbow Manufacturer Angle : 22.5 deg, 45 deg, 30deg, 90 deg, 1.0D, 180 deg, 1.5D, 3D, 2.5D, 2.0D, 4D, 6D, 5D, 7D-40D .
Standard: ASME B16.28, GB, ASME B16.9, MSS SP-75 JISB2311 DIN2605 JISB2312 JISB2313, ASME B16.25, BS, ISO
316L ss weld fitting Manufacturing process Push, Forge, Press, Cast, etc.
ASME B16.9 Stainless steel 316L fittings Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
316L stainless fittings Origin & Mills European, Japanese, USA, Korean, Ukraine, Indian, Russian
Specialized SS 316L Fittings Manufacturers of Stub End, 90º Elbows, Tees, Pipe Cap, Crosses, 45º Elbows, Reducers, Pipe Bend
Application of Stainless Steel 316L Pipe Fittings
  • Fittings To Connect Tubes and Pipe in Gas, Petroleum, Metallurgy, Chemical, Power, Construction, Shipbuilding etc
SS 316L Forged Fitting Thread Provided By Manufacturer BSPT, NPT, BSPP
Stainless Steel 316L Forged Fittings Pressure Rating Threaded end - 3000lb/ 2000lb/ 6000lbs
Socket weld end- 6000/ 3000/ 9000lbs
Dimension Specification MSS SP-79, 95, 83, 97, BS 3799, ASME 16.11
316L Stainless Steel Socket Weld Fittings Manufacturer Half Coupling, Union, Tee, Cross, Coupling, Cap, Outlet, Welding Outlet, Boss, Insert

The largest stainless steel 316L fittings distributor, importer, exporter, wholesaler, stockholder, and manufacturer in Mumbai

Nominal Pipe Size Outside Diameter 90° Elbows 45° Elbows 180° Returns
(inches) Long Radius Short Radius Long Radius Long Radius
(mm) (inches) Center to Face
(inches)
Center to Face
(inches)
Center to Face
(inches)
Radius
(inches)
Center to Center
(inches)
Back to face
(inches)
1/2 21.3 0.840 1 1/2 - 5/8 2 1 7/8
3/4 26.7 1.050 1 1/8 - 7/16 2 1/4 1 11/16
1 33.4 1.315 1 1/2 1 7/8 3 2 3/16
1 1/4 42.2 1.660 1 7/8 1 1/4 1 3 3/4 2 3/4
1 1/2 48.3 1.900 2 1/4 1 1/2 1 1/8 3 4 1/2 3 1/4
2 60.3 2.375 3 2 1 3/8 4 6 4 3/16
2 1/2 73.0 2.875 3 3/4 2 1/2 1 3/4 5 7 1/2 5 3/16
3 88.9 3.500 4 1/2 3 2 6 9 6 1/4
3 1/2 101.6 4.000 5 1/4 3 1/2 2 1/4 7 10 1/2 7 1/4
4 114.3 4.500 6 4 2 1/2 8 12 8 1/4
5 141.3 5.563 7 1/2 5 3 1/8 10 15 10 5/16
6 168.3 6.625 9 6 3 3/4 12 18 12 5/16
8 219.1 8.625 12 8 5 12 24 16 5/16
10 273.1 10.750 15 10 6 1/4 15 30 20 3/8
12 323.9 12.750 18 12 7 1/2 18 36 24 3/8

Manufacturer of AISI 316L Eccentric/Concentric Reducer, SUS 316L EN 10253-4 Equal/Unequal Tee, SA 403 WP 316L Pipe Bend/Return Bends in accordance with ISO 3419/ DIN 2605/ AWWA C208/ EN 10253-4, and seamless/welded SS 316L Pipe Fittings

Normal Size Of Pipe
(inches)
Pipe SchOD (inch)
Wall
Thick.
(inch)
Temperature(oF)
100200300400500600650700750
Allowable Stress(psi)
167001670016700155001440013500132001290012600
1"401.3150.133220522052205204719021783174317031664
801.3150.179306130613061284126402475242023652310
1601.3150.250449344934493417038743632355234713390
1 1/2"401.9000.145162916291629151214041317128712581229
801.9000.200230323032303213819861862182117791738
1601.9000.281336233623362312028992717265725972536
2"402.3750.154137113711371127211821108108310591034
802.3750.218198519851985184317121605156915341498
1602.3750.344328332833283304728312654259525362477
3"403.5000.21613011301130112081122105210281005982
803.5000.300184418441844171215901491145814251391
1603.5000.438278727872787258724032253220321532103
4"404.5000.2371102110211021023950891871851831
804.5000.337159615961596148213771291126212331204
1604.5000.531261126112611242425522111206420171970
5"405.5630.258965965965896832780763746728
805.5630.375142814281428132512311154112911031077
1605.5630.625247424742474229621332000195519111866
6"406.6250.280877877877814756709693677661
806.6250.432137913791379128011891115109010651040
1606.6250.719238223822382221120541925188318401797
8"408.6250.322771771771716665623610596582
808.6250.50012181218121811311050985963941919
1608.6250.906229822982298213319821858181717751734
10"4010.7500.365699699699649603565553540528
8010.7500.5941159115911591075999937916895874
16010.7501.125228922892289212419741850180917681727
Theoretical Weights (Kilogram)
DN Sch10 Sch40 Sch80
90 Degree
Elbow
45 Degree
Elbow
Equal
Tee
90 Degree
Elbow
45 Degree
Elbow
Equal
Tee
90 Degree
Elbow
45 Degree
Elbow
Equal
Tee
80.020.010.030.030.020.060.040.030.07
100.030.020.050.030.020.030.060.040.09
150.060.030.090.080.040.100.100.050.14
200.070.030.130.080.040.170.110.050.20
250.140.080.280.150.110.290.220.140.38
320.230.110.490.260.170.590.400.230.68
400.300.170.680.400.230.860.510.291.02
500.500.250.850.700.401.280.910.591.59
650.850.481.411.400.772.191.810.993.13
801.250.631.772.201.083.312.971.504.45
901.700.752.672.831.424.084.002.005.44
1002.101.083.464.472.095.276.182.817.71
1505.452.728.0710.895.4410.9916.328.1613.16
20010.205.3315.6521.5410.7720.9133.1116.5628.12
25018.159.7526.4638.5619.2735.3851.7125.8649.90
30025.8013.6239.4659.4229.7162.1479.3839.6983.91
316L Stainless Steel Forged Fittings

316L Stainless Steel Forged Fittings

ASTM A182 316L Forged Elbow

ASTM A182 316L Forged Elbow

UNS S31603 Forged Coupling

UNS S31603 Forged Coupling

Stainless Steel 316L Socket Weld Fittings

Stainless Steel 316L Socket Weld Fittings

316L SS SW Elbow

316L SS SW Elbow

Din 1.4404 Socket Weld Coupling

Din 1.4404 Socket Weld Coupling

316l Stainless Steel Threaded Fittings

316l Stainless Steel Threaded Fittings

SS 316L Threaded Coupling

SS 316L Threaded Coupling

ASTM A182 F316L Threaded Nipple

ASTM A182 F316L Threaded Nipple

Grade C Mn Si P S Cr Mo Ni Fe
SS 316L 0.035 max 2.0 max 1.0 max 0.045 max 0.030 max 16.00 - 18.00 2.00 - 3.00 10.00 - 14.00 68.89 min
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1399 °C (2550 °F) Psi - 75000 , MPa - 515 Psi - 30000 , MPa - 205 35 %
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316L 1.4404 / 1.4435 S31603 SUS 316L 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2 Z3CND17-11-02 / Z3CND18-14-03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3
Manufacturer of Stainless Steel 316L Cross Fittings, Inox AISI 316L Pipe Bend, and Welded Butt-Weld SA403 WP316L 45/ 90/ 180 Degree Elbow in India
Physical PropertyValue
Density 8.0 g/cm³
Melting Point 1400 °C
Thermal Expansion 15.9 x10^-6 /K
Modulus of Elasticity 193 GPa
Thermal Conductivity 16.3 W/m.K
Electrical Resistivity 0.74 x10^-6 Ω .m
Stainless Steel 316L Pipe Fittings Price Per Piece in IndiaPrice Applicable for jan 2022 to june 2022Price Applicable for July 2022 to December 2022
3/4" Nb Sch10s Cap Butt Weld Seamless 316l Stainless Steel Per PieceUS $9.53US $11.53
2" X 1-1/4" Nb Sch10s Concentric Reducer Butt Weld 316l Welded Stainless Steel Per PieceUS $12.69US $14.69
1" Nb Sch10s 90° 316L Stainless Steel Elbow Per PieceUS $19.28US $21.28
3" Nb Sch10s 90° Long Radius Elbow Butt Weld 316l Welded Stainless Steel Per PieceUS $12.01US $14.01
1-1/4" Nb Sch10s Stub End Type A Butt Weld 316l Welded Stainless Steel Per PieceUS $36.74US $38.74
2-1/2" Nb Sch10s Equal Tee Butt Weld 316l Welded Stainless Steel Per PieceUS $39.36US $41.36

Compare our price with other SS 316L Fittings Manufacturers in India. This is an approximate Price of Stainless Steel 316L Pipe Fittings in India. Feel free to contact us latest Stocklist of 316L ss Buttweld fittings in Mumbai. We supply 316L Stainless Steel Socket Weld Fittings in wide range of sizes and classes.

Sch10s 45 Long Radius Elbow 316l Welded Stainless Steel

3/4" Nb Sch10s 45° Long Radius Elbow 316l Welded Stainless Steel

Sch10s 90 Short Radius Elbow 316l Stainless Steel

3" Nb Sch10s 90° Short Radius Elbow 316l Stainless Steel

Sch10s 90 316L Stainless Steel Elbow

10" Nb Sch10s 90° 316L Stainless Steel Elbow

Sch80 Equal Tee Butt Weld 316l Stainless Steel

3/4" Nb Sch80 Equal Tee Butt Weld 316l Stainless Steel

Sch10s Equal Tee 316l Welded Stainless Steel

2" Nb Sch10s Equal Tee 316l Welded Stainless Steel

Sch60 Reducing Tee Butt Weld 316l Stainless Steel

2" X 1-1/2" Nb Sch60 Reducing Tee Butt Weld 316l Stainless Steel

Sch20 Eccentric Reducer 316l Stainless Steel

3/4" X 1/2" Nb Sch20 Eccentric Reducer 316l Stainless Steel

Sch10s Eccentric Reducer 316l Stainless Steel

1-1/2" X 1/2" Nb Sch10s Eccentric Reducer 316l Stainless Steel

Sch40 Reducing Tee 316l Stainless Steel

2" X 1-1/4" Nb Sch40 Reducing Tee 316l Stainless Steel

Manufacturer of UNS S31600/S31603 LR Elbow in Seamless & Welded and SCH10 SS 1.4404 Short Radius 90 Degree Elbow per ASME B16.9 Butt Welding
NPSKGLBS
1/20.110.25
3/40.110.25
10.230.5
0.410.9
0.521.15
212.2
1.814
32.956.5
3.798.35
46.1213.5
59.9822
615.8835
832.2171
1048.53107
1272.57160
1492.99205
16125.19276
18154.22340
20190.51420
22235.87520
24272.16600
26330.67729
30442.25975
36640.471412

ASTM a 403 wp 316L Tee Dimensions

NOMINAL PIPE SIZELENGTHCENTER TO ENDOUTSIDE DIAMETER
Inch.MCOD
1/2252521.3
3/4292926.7
1383833.4
1 1/4484842.2
1 1/2575748.3
2646460.3
2 1/2767673
3868688.9
3 1/29595101.6
4105105114.3
5124124141.3
6143143168.3
8178178219.1
10216216273.1
12254254323.9
14279279355.6
16305305406.4
18343343457.2
20381381508
22419419559
24432432610
26495495660
28521521711
30559559762
32597597813
34635635864
36673673914
38711711965
407497491016
427117621067
447628131118
468008511168
488388891219

SA403 WP316L Pipe Bend Radius

Gauge Min Bend Radius
Includes Min Closeness of Cutout to Bend
Radius
(Refers to Inner Radius)
11 gauge (0.120" |3.05mm) .5" .07", .08", .09", .1", .125"
14 gauge (0.075" | 1.9 mm) .275" .05", .055", .062", .07", .075"
.375" .07", .105"
.5" .09", .11", .115", .12"
1.375" .4"
16 gauge (0.060" | 1.52 mm) .2" .035", .05"
.265" .05", .055", .075", .08"
.375" .07"
.5" .105", .12"
18 gauge (0.048" | 1.22 mm) .2" .04", .045", .05"
.265" .06", .07", .08", .085"
.375" .1", .125"
.5" .115", .12"
20 gauge (0.035" | 0.89 mm) .2" .05"
.265" .06", .07"
.375" .095"
22 gauge (0.029" | 0.74 mm) .2" .05"
.265" .04", .08"
24 gauge (0.024" | 0.61 mm) .2" .04"
.265" .08"
GRADE SCHEDULE NOM. PIPE SIZE
WP-S SCH 10S 1/2″ - 12″
  SCH 40S 1/2″ - 12″
  SCH 80S 1/2″ - 12″
SCH 60 A403 wp316L 90° Long Radius Elbow

SCH 60 A403 wp316L 90° Long Radius Elbow

Stainless Steel 316L 90° Short Radius Elbow

Stainless Steel 316L 90° Short Radius Elbow

ASTM A182 316L Stainless Steel 45° Long Radius Elbow

ASTM A182 316L Stainless Steel 45° Long Radius Elbow

SCH 80 ASTM a 403 wp 316L 45° Short Radius Elbow

SCH 80 ASTM a 403 wp 316L 45° Short Radius Elbow

316L Stainless Steel 180° Long Radius Elbow

316L Stainless Steel 180° Long Radius Elbow

15 NB SCH 100 SA403 Gr WP316L 180° Short Radius Elbow

15 NB SCH 100 SA403 Gr WP316L 180° Short Radius Elbow

A403 grade WP316L 1D Elbow

A403 grade WP316L 1D Elbow

316L SS 1.5D Elbow

316L SS 1.5D Elbow

SS 316L 3D Elbow

SS 316L 3D Elbow

UNS S31603 5D Elbow

UNS S31603 5D Elbow

SCH 160 ASTM A182 316L 10D ELBOW

SCH 160 ASTM A182 316L 10D ELBOW

A403 wp316L Seamless Buttwelding 45° and 90° Elbows

A403 wp316L Seamless Buttwelding 45° and 90° Elbows

SCH 120 SA403 WP316L Welded Elbows

SCH 120 SA403 WP316L Welded Elbows

Din 1.4404 Seamless Buttwelding 180° Returns

Din 1.4404 Seamless Buttwelding 180° Returns

SCH 20 Stainless Steel 316L Straight Tees and Crosses

SCH 20 Stainless Steel 316L Straight Tees and Crosses

ASTM A403 WP316L Reducing Outlet Tees and Reducing Outlet Crosses

ASTM A403 WP316L Reducing Outlet Tees and Reducing Outlet Crosses

SCH 10 SA403 WP316L Equal Tee

SCH 10 SA403 WP316L Equal Tee

ASME SA403 WP316L Reducing Tee

ASME SA403 WP316L Reducing Tee

SCH XS UNS S31603 Equal Cross

SCH XS UNS S31603 Equal Cross

ASTM A182 316L Reducing Cross

ASTM A182 316L Reducing Cross

A403 wp316L Reducers

A403 wp316L Reducers

SCH 140 SA403 WP316L Concentric Reducer

SCH 140 SA403 WP316L Concentric Reducer

ASTM A182 316L Stainless Steel Eccentric Reducer

ASTM A182 316L Stainless Steel Eccentric Reducer

SA403 Gr WP316L Stub End

SA403 Gr WP316L Stub End

ASTM A403 WP316L Lap Joint Stub Ends

ASTM A403 WP316L Lap Joint Stub Ends

SCH 30 316L Stainless Steel Long Stubend

SCH 30 316L Stainless Steel Long Stubend

SS 316L Short Stubend

SS 316L Short Stubend

ASTM a 403 wp 316L Pipe Cap

ASTM a 403 wp 316L Pipe Cap

SCH XXS ASME SA403 WP316L End Cap

SCH XXS ASME SA403 WP316L End Cap

ASTM A182 316L Collar

ASTM A182 316L Collar

316L SS Swage Nipple

316L SS Swage Nipple

SCH STD Stainless Steel 316L Pipe Nipples

SCH STD Stainless Steel 316L Pipe Nipples

Din 1.4404 Barrel Nipple

Din 1.4404 Barrel Nipple

UNS S31603 Reducing Nipple

UNS S31603 Reducing Nipple

450 NB SCH 40 A403 grade WP316L Bend

450 NB SCH 40 A403 grade WP316L Bend

A403 gr wp316L Long Radius Bend

A403 gr wp316L Long Radius Bend

  • Aerospace structures
  • Pulp and paper processing equipment
  • Textile industry equipment
  • Stainless steel base plates
  • Architectural
  • Pharmaceutical processing equipment
  • Oil & petroleum
  • Food processing equipment
  • Hardness Test
  • Micro and Macro Test
  • Pitting Resistance Test
  • Chemical Analysis
  • PMI Testing
  • Flaring Test
  • Intergranular Corrosion Test
  • Flattening Test
SS Grade 316L reducing cross fittings

Stainless Steel Grade 316L reducing cross fittings

Kuala Lumpur, Poland, Tehran -Iran, Qatar, Indonesia South Korea, United States, Dubai

316L Stainless Steel Socket Weld End Cap

316L Stainless Steel Socket Weld End Cap

Malaysia, France, Jakarta -Indonesia, Romania Dubai- UAE, Iran, Netherlands, Singapore

MSS sp 43 ASTM A403 WP316L stub end

MSS sp 43 ASTM A403 WP316L stub end

Chile, South Africa, Malaysia, Kuwait, Europe, Vietnam, Czechia, Norway, Belgium, Germany, Nigeria

Grade 316L Stainless Steel Npt Reducers

Grade 316L Stainless Steel Npt Reducers

Istanbul- Turkey, Argentina, NY 12203 (USA), Bahrain, Oman, Bangladesh, Finland, Jakarta, Hong Kong, Brazil

Stainless Steel UNS S31603 Pipe Tee

Stainless Steel UNS S31603 Pipe Tee


Japan, States, United Kingdom (UK), Ellington -United Spain, Saudi Arabia (KSA), Malaysia, USA, Thailand

Grade 316L Stainless Steel 180 Degree Elbow

Grade 316L Stainless Steel 180 Degree Elbow

Canada, Austria, Turkey, Philippines, Los Alamos -Mexico, Dammam -KSA, Greece, Singapore