Split Tee manufacturer in India

Manufacturer in India of 4 Inch - 56 Inch Extruded Hot Tap Split Tee and Carbon Steel Split Tee


What Is Split Tee?
A split tee is a T-shaped pipe fitting whose inner diameter matches the pipe's intended hot taper's outer diameter. It's mainly applied when hot tapping into a pipeline. When the branching connection is bigger than or equal to half the run direction diameter, this type of tee fitting is utilised. The pipe's internal flow is determined by the run direction, which will be severed. It is crucial to adhere to hot tap and pipe standards for the Split Tee's design to be compliant.
The benefits of getting a Split Tee are:

  • It will help to tie into a line while it is in service.
  • It can be used with activities related to hot tapping and line stop installations.
  • If the process is done properly, the weld will not penetrate the tapping area. However, proper precautions are needed to be taken as welding burn can lead to line failure.
  • They can easily be customized according to requirements and are readily available.

The slip tee cannot be utilised with a pipe that has an interior coating or cement lining, though. All of the protection that the coating has provided will be destroyed when it peels off due to heat.

How Do You Weld A Reducing Split Tee?
The specifications for fittings with a hot tap machine would need to be met by split tees with decreasing branches. If the Reducing Split Tee has buttweld ends, those ends must be bevelled in accordance with ASME B16.5. Reducing Split Tees are made utilising a variety of methods, including hot drawing, reduced branch opening, and branch outlet welded to snug-fitting sleeves. As required by ASME Section-IX, the welding techniques used during the production process shall be followed. The Reducing Split Tee welding qualification test technique should comprise the Charpy impact test and the hardness test.

Full Encirclement Saddle Vs Split Tee
In accordance with the standards, the Full Encirclement Saddle aids in providing reinforcement for branched outlets since additional strength may be necessary. They are created such that they would entirely encircle the pipe, and the saddle is not properly built to hold pressure. They have a hole that aids in the removal of welding gas.
A split tee's inner diameter matches the outer diameter of the pipe that will be hot tapered. It's mainly applied when hot tapping into a pipeline. When the width of the run direction is more than or equal to half, it is employed.

How To Install Split Tee Pipe Fitting
With the aid of joints, the Split Tee Pipe Fitting is connected to the heated tapered pipe, assisting in creating a reliable connection.

Split Tee Hydrotest
Split Tee Hydrotest aids in finding any flaws that were missed during earlier inspection. The test verifies the integrity of the spit tee pipe fitting and aids in the detection of all types of design flaws, including any possibility for leaks.

Split Tee manufacturer in India

Split Tee manufacturer in India

Medium Carbon Steel Split Tee Pipeline and 41-51 bar ASTM A234 WPB Split Tee Fitting Exporter in Mumbai


Standards ANSI B31.1, B31.3, ANSI B31.4 & B31.8
Size 2" TO 48"
Pressure Ratings 150# TO 2500#
DIN DIN2605, DIN2616, DIN2615, DIN2617, DIN28011
Schedule SCH20, SCH40, STD, SCH30, SCH80, XS, SCH80, SCH120, SCH60, SCH140, SCH160, XXS
Form Split Tee
Value Added Services Epoxy & FBE Coating, Hot Dipped Galvanizing, Electro Polish, Sand Blasting, Threading, Soldering

Largest wholesalers, suppliers, dealers, stocks, importers, distributors, stockists, exporters, and manufacturers of ASTM B148 UNS C95400 flanges in Mumbai

Nominal 
Pipe Size
TYPE Outside
Diameter OD
STD X – S
E & L D T ID E & L D T ID
1

B
B
B
1.315
1.660
1.900
5.75
6.25
7.00
1.75
1.75
2.00
0.133
0.140
0.145
1.049
1.380
1.610
6.50
7.25
8.50
2.00
2.25
2.50
0.179
0.191
0.200
0.957
1.278
1.500
2

3
A/B
B
B
2.375
2.875
3.500
8.00
9.50
10.00
2.50
2.50
3.00
0.154
0.203
0.216
2.067
2.469
3.068
*8.00
**9.00
10.50
11.00
2.50
2.50
3.00
0.128
0.276
0.300
1.939
2.323
2.900

4
5
B
A/B
B
4.000
4.500
5.562
11.50
12.00
13.50
3.00
3.00
3.50
0.226
0.237
0.258
3.548
4.026
5.047
12.50
*12.00
**13.50
15.00
3.00
3.00
3.50
0.318
0.337
0.375
3.364
3.826
4.813
6
8
10
A/B
B
B
6.625
8.625
10.750
14.50
17.50
20.50
3.50
4.50
5.00
0.280
0.322
0.365
6.065
7.981
10.020
*14.50
**17.50
20.50
24.00
*3.50
**4.00
5.00
5.50
0.432
0.500
0.500
5.761
7.625
9.750
12
14
16
B
B
B
12.750
14.000
16.000
24.50
27.00
30.00
5.50
6.00
6.50
0.375
0.375
0.375
12.000
13.250
15.250
27.50
31.00
34.50
6.00
6.50
7.50
0.500
0.500
0.500
11.750
13.000
15.000
18
20
24
B
B
B
18.000
20.000
24.000
32.00
35.00
40.50
7.00
8.00
9.00
0.375
0.375
0.375
17.250
19.250
23.250
37.50
40.50
47.50
8.00
8.50
10.00
0.500
0.500
0.500
17.000
19.000
23.000
DN NPS STD 40 XS 80 160 XXS
40 1 1/2 0.9 0.9 1.3 1.3 1.5 1.3
50 2 1.5 1.5 2.2 2.2 2.7 3.4
65 2 1/2 2.7 2.7 3.0 3.0 3.1 3.8
80 3 3.8 3.8 4.4 4.4 5.6 6.1
90 3 1/2 4.6 4.6 5.9 5.9    
100 4 6.5 6.5 7.7 7.7 10.2 12.9
15  1/2 0.21 0.2 0.2 0.2    
20  3/4 0.2 0.2 0.3 0.3    
25 1 0.3 0.3 0.5 0.5    
32 1 1/4 0.6 0.6 0.7 0.7    
125 5 9.7 9.7 13.5 13.5 19.8 25.7
150 6 14 14 19.3 19.3 34 30.6
200 8 24.5 24.5 34.5 34.5 50 47.7
250 10 41.3 41.3 58.4 67.5 111.2 84.7
300 12 65 69 76.5 105 158 129
350 14 83 96 104 142 232  
400 16 110 120 120 187 335  
450 18 132 170 159 263 564  
500 20 168 240 192 356 756  
550 22 185   209 416 1002  
600 24 222 345 251 548 1215  

Manufacturer of Alloy Steel Welded Split Tee and ASME B31.8/B31.4 approved ASTM A420 WPL6 Split Tee Pipe Fitting in India

Split Tee Price Per Piece in India Extruded Hot Tap Split Tee Price in INR Carbon Steel Split Tees Price in UAE Dirham ASTM A234 WPB Splits Tee Fitting Price in USD
12 x 10 x 12 inch (NO FLANGE) EXTRUDED SPLITS TEE Per Kg 776,950 UAE Dirham 38495.73 $10480.76
LOOSE SPLITS FLANGE: TEE DRILLING MS/GL EQUAL 80 X 80 X 80 Per Kg 7,853 UAE Dirham 389.09 $105.94

Are you trying to find an Indian producer of split tees made of carbon steel. Cheapest Split Tee for Piping Connection in Bulk Fabrication. Compare the Stainless Steel Split Tee price list with those from different manufacturers.

You can employ a variety of techniques, including TIG, arc, and MIG welding, to get the desired weld. Split tee welding can be done using any of these techniques, but TIG welding is the most popular.

Weight of a Split Tees calculated as per formula:

0.02466*(S+1.5)*[D-(S+1.5)]*(3C-D/2)/1000
  • S= Wall Thickness in mm
  • D= Outside Diameter in mm
  • C= Length*[Out Diameter-(Thickness+2)]*(Thickness*2)*0.02466*Length, the unit is mm.
ASTM A234 WPB Split Tee Fitting

ASTM A234 WPB Split Tee Fitting

ASTM A420 WPL6 Split Tee Pipe Fitting

ASTM A420 WPL6 Split Tee Pipe Fitting

ST35.8 Split Tee Hot Tap Fittings

ST35.8 Split Tee Hot Tap Fittings

Mild Steel Full Encirclement Split Tee

Mild Steel Full Encirclement Split Tee

Medium Carbon Steel Hot Tap Split Tee

Medium Carbon Steel Hot Tap Split Tee

Split Tee Pipeline

Split Tee Pipeline

Carbon Steel Split Tee

Carbon Steel Split Tee

Alloy Steel Welded Split Tee

Alloy Steel Welded Split Tee

Split Tee With Guide Bar

Split Tee With Guide Bar

Split Tee Without Guide Bar

Split Tee Without Guide Bar

WPHY 42 Fabricated Split Tee

WPHY 42 Fabricated Split Tee

ASTM A234 WP11 Extruded Split Tee

ASTM A234 WP11 Extruded Split Tee

Reinforced Set On Branch Fitting

Reinforced Set On Branch Fitting

ASTM A234 WPC Split Reducing Tee

ASTM A234 WPC Split Reducing Tee

Split Tee Hot Tap Fitting

Split Tee Hot Tap Fitting

Split Tee Flange

Split Tee Flange

ASTM A403 WP304 Double Split Tee Joint

ASTM A403 WP304 Double Split Tee Joint

Stainless Steel Split Tee

Stainless Steel Split Tee

Split Weld Tee

Split Weld Tee

Equal Split Tee

Equal Split Tee

Reducing Split Tee

Reducing Split Tee

ASTM A403 WP316 Split Pipe Tee

ASTM A403 WP316 Split Pipe Tee

Split Long Sleeve Tee

Split Long Sleeve Tee

Extruded Hot Tap Split Tee

Extruded Hot Tap Split Tee

Supplier & exporter of ST37.0/ ST35.8 Split Tee Hot Tap Fittings and Mild Steel Full Encirclement Split Tee in India
  • The use of a split tee has many benefits. A split tees is helpful for hot tapping and installing line stops, in addition to the obvious advantage of being able to tie into a line while it is still in operation. When a repair is needed but the line cannot be shut down, a Stopple may be introduced into the line as a line stop (in the commercial sector).
  • There is zero probability that the weld will enter the tapping region when done properly. However, care should be taken to prevent piercing the welded-on line. Burn through during welding could cause the line to fa
  • There are split tees available with a full bore. There are several techniques to lower branch diameters when using a splits tee.

Is the inside of the pipe coated or lined with cement? A split tee is not an option if such is the case. The coating may flake off as a result of welding heat, rendering the coatings' protections useless. During the hot tapping operation, the instrument will harm the paint or cement liner. Additionally, the coating's ability to protect the pipe at the hot tap will be eliminated.

Is the flow rate in the pipeline constant to transfer the heat produced by the hot tap or welding tool? A complete shutdown should be taken into consideration to finish the tie-in if this isn't the case.

Maximum allowable operating pressure 41 bar to 51 bar (605 to 740 psi) at 38°C (100°F)
Manufacturer in Mumbai of ANSI class 150 to 2500 Carbon Steel WPHY 42 Fabricated Split Teef and ASTM A234 WP11 Extruded Split Teef

Nominal Pipe Size

1/2 to 2.1/2

3 to 3.1/2

4

5 to 8

10 to 18

20 to 24

26 to 30

32 to 48

Inside Dia at End

0.8

1.6

1.6

1.6

3.2

4.8

+6.4
-4.8

+6.4
-4.8

Outside Dia
at Bevel (D)

+1.6
-0.8

1.6

1.6

+2.4
-1.6

+4
-3.2

+6.4
-4.8

+6.4
-4.8

+6.4
-4.8

Center to End (C / M)

2

2

2

2

2

2

3

5

Wall Thk (t)

Not less than 87.5% of Nominal Wall Thickness

ND Max off angle Max off plane
Q P
1/2 a 4 1 2
5 a 8 2 4
10 a 12 3 5
14 a 16 3 7
18 a 24 4 10
26 a 30 5 10
32 a 42 5 13
44 a 48 5 20
  • Marine Applications
  • Industrial Boilers
  • Power Plants
  • Oil & Gas Industry
  • Paper & Pulp
  • Condensers
  • Ship Building
  • Nuclear Power/ Nuclear Plants
  • Refineries
  • Heat Exchangers
  • Fossil Fuel Power Plants