Inconel 600 Flanges Manufacturer

  • Home /
  • Inconel 600 Flanges

Alloy 600 Blind Flange and UNS n06600 Weld Neck Flange supplier in India


Inconel 600 Blind Flange VS Inconel 600 weld neck flange
There is neither a hub nor a bore in the centre of an Inconel 600 blind flange. They are utilised to stop pipe flow or to seal a pressure vessel's nozzle. To stop the pipe run, they are normally positioned in between the flanges. They are utilised in a variety of sectors and made from various materials.
AnInconel 600 weld neck flangeis distinctive thanks to its tapering hub. It basically aids in shifting the stress to the pipe and making sure that the area of high stress concentration at the bottom of the flange body is reduced. They are employed in challenging and important applications.

uns n06600 flange properties
is distinctive thanks to its tapering hub. It basically aids in shifting the stress to the pipe and making sure that the area of high stress concentration at the bottom of the flange body is reduced. They are employed in challenging and important applications. uns n06600 flangesare created to withstand a variety of temperatures, from cryogenic to high (upto 1093 degrees C). In a variety of organic and inorganic substances, it exhibits good corrosion resistance. Alkaline solutions and chloride ions cannot harm it. The flanges exhibit strong resistance to corrosion cracking brought on by tension. It has some good mechanical qualities and is non-magnetic. They are used in a variety of applications across several industries as a result of all these qualities.

astm b564 uns n06600 Slip on flange temprature and heat conditions
The astm b564 uns n06600 Slip on flange can endure temperatures up to 1093 degrees C that fall between cryogenic and high. They are therefore frequently employed in industries like chemical, among others, where temperatures can differ. A good heat resistance is also displayed by the astm b564 uns n06600 Slip on flange. Throughout the spectrum of annealing to severely cold working conditions, they are free from ageing or stress corrosion. The flange is utilised in a variety of applications that take place within the specified temperature range as a result of all these characteristics (cryogenic to elevated temperature of 1093 degrees C).


Size Range 1/2″(15 NB) to 48″ (1200NB)
Pressure Rating Chart ANSI 150 LBS, 300 LBS, 2500 LBS, 900 LBS, 600 LBS, 1500 LBS
JIS 16 K, 5K, 10 K, 20 K, 30 K, 40 K, 63 K
Manufacturer of Connect Type/ Flange Face Type RF, Small Tongue, RTJ, FF, LJF, Large Tongue & Groove
Coating Zinc Plated, Anti-rust Paint, Yellow Transparent, Oil Black Paint, Cold and Hot Dip Galvanized
Manufacturer of GOST, JIS, ANSI, DIN, UNI, BS, AWWA, AS2129, SABS, NFE, EN etc.
Inconel 600 DIN Pressure Calculation 25Bar 40Bar 16Bar 6Bar 10Bar / PN64 PN10 PN25 PN16 PN6 PN40
Equipment Pushing Machine, Press machine, Sand-blasting machine, Bending machine, electric bevelling machine etc
Origin Japan / West Europe / Indian / USA / Korean
UNI / EN 16Bar 6Bar 40Bar 10Bar 25Bar
Test X-ray detector, Direct-reading Spectrograph, Magnetic particle detector, Ultrasonic flaw detector, Hydrostatic testing machine
Standards Provided By Manufacturer ISO70051, MSS S44, API7S-43, API605, B16.48, ANSI/ASME B16.5, B16.47 Series A & B, BS4504, JISB2220, BS1560-3.1, ASME/ANSI B16.5/16.36/16.47A/16.47B, BS 10, EN-1092, DIN, API7S-15, EN1092
Common Types By Manufacturer Threaded / Screwed / Forged / Plate
Inconel 600 Production technique Used By Manufacturer Heat treated, Forged and machined

Standard Sizes of Nickel 600 Forged Rings at lowest price and Custom Sizes can be produced in inconel 600 hot forged rings

NPS (Nominal Pipe Size) Loose (Lap Joint) NPT (Threaded) SORF (Slip On) BLRF (Blind) SWRF (Socket Weld) WRNR (Weld Neck)
½ 1 1 1 2 2 2
1 2 2 2 2 2 3
3 3 3 3 3 3
¾ 2 2 2 2 2 2
3 3 3 4 3 4
8 8 8 7 8 10
2 5 5 5 5 5 6
3 9 9 9 9 9 11.5
4 13 13 13 17 13 16.5
11 12 11 13 11 12
5 15 15 15 20 15 21
8 30 30 30 47 30 42
6 19 19 19 27 19 26
10 43 43 43 70 43 54
24 275 220 220 430 220 268
14 105 90 90 140 90 114
12 64 64 64 123 64 88
16 140 98 106 180 98 140
20 195 165 165 285 165 197
18 160 130 130 220 130 165
22 245 185 185 355 185 225

astm b564 uns n06600 material Stockist and Exporter in Mumbai, Refer our din 17754 flange dimensions and weight chart

Temperature °F Class 150 Class 600 Class 1500 Class 400 Class 900 Class 300 Class 2500
-20 to 100 275 1440 3600 960 2160 720 6000
300 205 1080 2700 720 1620 540 4500
200 230 1200 3000 800 1800 600 5000
400 190 995 2485 660 1490 495 4140
600 140 875 2185 580 1310 435 3640
650 125 860 2150 575 1290 430 3580
500 170 930 2330 620 1395 465 3880
700 110 850 2125 565 1275 425 3540
750 95 830 2075 555 1245 415 3460
850 65 790 1980 530 1190 395 3300
800 80 805 2015 540 1210 405 3360
900 50 780 1945 520 1165 390 3240
950 35 765 1910 510 1145 380 3180
1000 20 640 1605 430 965 320 2675
1100 20 515 1285 345 770 255 2145
1150 20 400 995 265 595 200 1655
1050 20 615 1545 410 925 310 2570
1200 20 310 770 205 465 155 1285
1250 20 225 565 150 340 115 945
1300 20 170 430 115 255 85 715
1400 20 95 240 65 145 50 400
1350 20 125 310 80 185 60 515
1450 15 70 170 45 105 35 285
1500 10 55 135 35 80 25 230
Inconel 600 Flanges Price Per Piece in India Alloy 600 Flanges Price in INR Inconel 600 Flanges Price in UAE Dirham ASTM B564 UNS N06600 Flanges Price in USD
INCONEL 625 FLANGES 2 600 RTJ Per Unit 19,519 UAE Dirham 963.35 $262.28
BLIND FLANGE 2 150# RF ASME B16.5 50-150RF-INCONEL 600 Per Kg 18,583 UAE Dirham 917.16 $249.70
ASME SB564 UNS N06600 ASME B16.5 11/2NB SCH 40 Per Unit 27,828 UAE Dirham 1373.44 $373.93
INCONEL FORGED ALLOY 600 FLANGE ASME B16.5-4NB 300LBS Per Kg 74,123 UAE Dirham 3658.32 $996.00
Grade C Ni Si S Cu Mn Fe Cr
Inconel 600 0.15 max 72.00 min 0.50 max 0.015max 0.50 max 1.00 max 6.00 – 10.00 14.00 – 17.00
Element Density Yield Strength (0.2%Offset) Tensile Strength Melting Point Elongation
Inconel 600 8.47 g/cm3 Psi – 45,000 , MPa – 310 Psi – 95,000 , MPa – 655 1413 °C (2580 °F) 40 %
STANDARD WERKSTOFF NR. EN GOST JIS BS UNS AFNOR
Inconel 600 2.4816 NiCr15Fe МНЖМц 28-2,5-1,5 NCF 600 NA 13 N06600 NC15FE11M
SEE our Nickel Alloy 600 Slip on Flange Price List and ASME SB564 n06600 Socket Weld Flange Price Ex Mumbai
Inconel 600 Weld Neck Flanges

Inconel 600 Weld Neck Flanges

ASTM B564 UNS N06600 Reducing Flanges

ASTM B564 UNS N06600 Reducing Flanges

WNR 2.4816 WNRF Flange

WNR 2.4816 WNRF Flange

Alloy 600 Screwed Flange

Alloy 600 Screwed Flange

Nickel 600 Slip On Flange

Nickel 600 Slip On Flange

Nickel Alloy 600 Long Weld Neck Flange

Nickel Alloy 600 Long Weld Neck Flange

ASTM B564 Inconel 600 Ring Joint Flange

ASTM B564 Inconel 600 Ring Joint Flange

Inconel Alloy 600 Lapped Joint Flange

Inconel Alloy 600 Lapped Joint Flange

600 Inconel Orifice Flanges

600 Inconel Orifice Flanges

2.4816 Inconel 600 BLRF Flanges

2.4816 Inconel 600 BLRF Flanges

DIN 2.4816 SWRF Flanges

DIN 2.4816 SWRF Flanges

Inconel 600 Spectacle Blind Flange

Inconel 600 Spectacle Blind Flange

ASTM B564 UNS N06600 Girth Flanges

ASTM B564 UNS N06600 Girth Flanges

WNR 2.4816 Nipoflange

WNR 2.4816 Nipoflange

Alloy 600 Tongue & Groove Flange

Alloy 600 Tongue & Groove Flange

Nickel 600 Expander Flanges

Nickel 600 Expander Flanges

Nickel Alloy 600 Blind Flange

Nickel Alloy 600 Blind Flange

ASTM B564 Inconel 600 SORF Flanges

ASTM B564 Inconel 600 SORF Flanges

Inconel Alloy 600 Threaded Flange

Inconel Alloy 600 Threaded Flange

600 Inconel Socket Weld Flange

600 Inconel Socket Weld Flange

Nickel Alloy 600 Flanges

Nickel Alloy 600 Flanges

UNS N06600 Flanges

UNS N06600 Flanges

Nickel 600 Flanges

Nickel 600 Flanges

Inconel UNS N06600 Flanges

Inconel UNS N06600 Flanges

Alloy 600 Flanges

Alloy 600 Flanges

ASTM B564 UNS N06600 Flanges

ASTM B564 UNS N06600 Flanges

Inconel Alloy 600 Flanges

Inconel Alloy 600 Flanges

Inconel 600 Blind Flanges Dimensions

Size in Inch Size in mm ISO Stud Size RF Height Outer Dia. RF Dia. Hole Size PCD No of Bolts Bolt Size UNC Flange Thickness RF Stud Length Weight in kg
D A C E B
1/2 15 M20 7 135 34.9 7/8 88.9 4 3/4 30.2 120 3.2
3/4 20 M20 7 140 42.9 7/8 95.2 4 3/4 31.8 125 3.7
1 25 M24 7 160 50.8 1 108 4 7/8 35 140 5
1 1/4 32 M27 7 185 63.5 1 1/8 130.2 4 1 38.1 150 7.8
1 1/2 40 M30 7 205 73 1 1/4 146 4 1 1/8 44.5 170 10.5
2 50 M27 7 235 92.1 1 1/8 171.4 8 1 50.9 180 18
2 1/2 65 M30 7 265 104.8 1 1/4 196.8 8 1 1/8 57.2 195 25.5
3 80 M33 7 305 127 1 3/8 228.6 8 1 1/4 66.7 220 39
4 100 M39 7 355 157.2 1 5/8 273 8 1 1/2 76.2 255 61.5
5 125 M45 7 420 185.7 1 7/8 323.8 8 1 3/4 92.1 300 102
6 150 M52 7 485 215.9 2 1/8 368.3 8 2 108 345 157
8 200 M52 7 550 269.9 2 1/8 438.2 12 2 127 380 241
10 250 M64 7 675 323.8 2 5/8 539.8 12 2 1/2 165.1 490 470
12 300 M72 7 760 381 2 7/8 619.1 12 2 3/4 184.2 540 575
Get Distributor Price in Sizes 1/2″NB TO 60″NB of Inconel 600 ring type joint flange, Threaded Flange and Alloy 600 Long Welding Neck Flange

Inconel 600 Weld Neck Flanges Dimensions

Flange NPS H Inside
Diameter
Flat Face
Thickness (T2)
Outside
Diameter
Raised Face
(RF)
Raised Face
(R)
H1 Raised Face
Thickness (T)
T1 Bolt Circle
(BC)
Bolt Hole
(B)
No. of
Bolt Holes
1/2" 1.19" 0.62" 1.82" 3.50" .063" 1.38" 0.84" 1.88" .38" 2.38" .62" 4
1-1/4" 2.31" 1.38" 2.19" 4.62" .063" 2.50" 1.66" 2.25" .56" 3.50" .62" 4
3/4" 1.50" 0.82" 2.00" 3.88" .063" 1.69" 1.05" 2.06" .44" 2.75" .62" 4
1-1/2" 2.56" 1.61" 2.38" 5.00" .063" 2.88" 1.90" 2.44" .62" 3.88" .62" 4
1" 1.94" 1.05" 2.13" 4.25" .063" 2.00" 1.32" 2.19" .50" 3.12" .62" 4
2" 3.06" 2.07" 2.44" 6.00" .063" 3.62" 2.38" 2.50" .69" 4.75" .75" 4
2-1/2" 3.56" 2.47" 2.69" 7.00" .063" 4.12" 2.88" 2.75" .82" 5.50" .75" 4
3" 4.25" 3.07" 2.69" 7.50" .063" 5.00" 3.50" 2.75" .88" 6.00" .75" 4
4" 5.31" 4.03" 2.94" 9.00" .063" 6.19" 4.50" 3.00" .88" 7.50" .75" 8
5" 6.44" 5.05" 3.44" 10.00" .063" 7.31" 5.56" 3.50" .88" 8.50" .88" 8
3-1/2" 4.81" 3.55" 2.75" 8.50" .063" 5.50" 4.00" 2.81" .88" 7.00" .75" 8
6" 7.56" 6.07" 3.44" 11.00" .063" 8.50" 6.63" 3.50" .94" 9.50" .88" 8
8" 9.69" 7.98" 3.94" 13.50" .063" 10.62" 8.63" 4.00" 1.06" 11.75" .88" 8
22" 24.25" 21.25" 5.82" 29.50" .063" 25.25" 22.00" 5.88" 1.75" 27.25" 1.38" 20
10" 12.00" 10.02" 3.94" 16.00" .063" 12.75" 10.75" 4.00" 1.13" 14.25" 1.00" 12
12" 14.38" 12.00" 4.44" 19.00" .063" 15.00" 12.75" 4.50" 1.19" 17.00" 1.00" 12
16" 18.00" 15.25" 4.94" 23.50" .063" 18.50" 16.00" 5.00" 1.38" 21.25" 1.12" 16
18" 19.88" 17.25" 5.44" 25.00" .063" 21.00" 18.00" 5.50" 1.50" 22.75" 1.25" 16
14" 15.75" 13.25" 4.94" 21.00" .063" 16.25" 14.00" 5.00" 1.32" 18.75" 1.12" 12
20" 22.00" 19.25" 5.63" 27.50" .063" 23.00" 20.00" 5.69" 1.63" 25.00" 1.25" 20
24" 26.12" 23.25" 5.94" 32.00" .063" 27.25" 24.00" 6.00" 1.82" 29.50" 1.38" 20
  • The material is resistant to a wide range of corrosive agents.
  • Almost impervious to chlorine ion stress corrosion cracking
  • Non-magnetic
  • Outstanding mechanical properties
  • High strength and weldability over a wide temperature range
  • Fossil Fuel Power Plants
  • Refineries
  • Nuclear Plants
  • Ship Building
  • Marine Applications
  • Paper & Pulp
  • Oil & Gas Industry
  • Power Plants