Incoloy 800 Pipe Fittings

  • Home /
  • Incoloy 800 Pipe Fittings

Manufacturer of ASTM B366 UNS N08800 Tee and Nickel Alloy 800 Elbow in India


What is Incoloy 800 Pipe Fittings?
Iron, chromium, and nickel are among the constituents that make up the alloy that makes up Incoloy 800. This alloy's chemical makeup has contributed to the development of some distinctive characteristics, such as stability. Even after prolonged exposure to high temperatures, it can keep its austenitic structure. They are also well-known for their high strength and improved resilience to various conditions, including as aqueous, oxidising, and reducing ones.
Incoloy 800 Pipe Fittings are as machinable as any iron-based alloy fitting, which implies that machining causes them to work-harden. They can be welded using conventional techniques since they have good weldability. It has good formability and ductility. The Incoloy 800 Pipe Fittings are employed in a wide variety of applications across numerous sectors as a result of all these special qualities. It is utilised in heating elements, carburizing equipment, heat exchangers, and other things.
The Incoloy 800 Pipe Fittings can maintain its characteristics at temperatures as high as 1500 degrees Fahrenheit. The material has a very high nickel content chemically, which accounts for their resistance to stress corrosion cracking and embrittlement caused by chlorides. There are several types of Incoloy 800 Pipe Fittings that are utilised for diverse purposes, and the fittings are offered in butt-welded and socket-welded forms.

Alloy 800 Socket Weld Fittings Vs UNS N08800 Threaded Fittings

  • The pipes are put into sockets on Alloy 800 Socket Weld Fittings before they are linked by fillet welds. However, no welding is necessary to attach the UNS N08800 Threaded Fittings to the pipe. It is readily screwed.
  • Threaded fittings are more simpler to install than socket weld fittings, thus they should be used with pipes that need to be put together and taken apart frequently.
  • Compared to threaded fittings, which are typically used for non-critical applications, socket weld fittings are stronger and better able to handle critical applications.
  • The threaded fittings are more affordable compared to the socket weld fittings.

Nickel 800 Reducer Vs Incoloy 800 Equal Tee
The pipe's size can be changed from a bigger to a smaller bore using the Nickel 800 Reducer. They also aid in regulating the pipe run's flow rate. Concentric reducers, which are the most popular and are used for vertical applications, and eccentric reducers, which are utilised to keep the same top or bottom level, are the two different varieties of Nickel 800 Reducers (horizontal applications).
An example of a T-shaped fitting is the Incoloy 800 Equal Tee, which helps to combine or split the flow, modify the flow direction, and also manage the rate of flow inside the pipe. The diameter of the branches or outputs on an equal tee is the same as the diameter of the main connection line.

Incoloy 800H Fittings Vs Incoloy 800Ht Buttweld Fittings
Incoloy 800H and Incoloy 800Ht Buttweld Fittings differ primarily in their chemical composition, which also affects their performance. The 800Ht alloy's creep and rupture qualities are improved by the limited inclusion of aluminium and titanium in the composition.

UNS N08800 Short Radius Elbow vs WNR 1.4876 Long Radius Elbows
The radius of curvature is the main distinction between the UNS N08800 Short Radius Elbow and the WNR 1.4876 Long Radius Elbow. While it is the same for short radius elbows as the pipe diameter, it is 1.5 times the pipe diameter for long radius elbows. The efficiency of the change in flow direction increases with radius.

Incoloy 800 Pipe Fittings

Incoloy 800 Pipe Fittings

The largest collection of Inconel 800 Eccentric / Concentric Reducer and Nickel Alloy 800 Stub End are available in Mumbai from Incoloy 800 Pipe Fittings manufacturers in India


Incoloy 800 Pipe Fitting Specifications ASTM B366
Incoloy 800H Fitting Thickness SCH30, SCH10, SCH 160, SCH20, SCH60, XS, STD SCH40, SCH 80, SCH 120, SCH 140, SCH 100, XXS available with NACE MR 01-75
Incoloy 800 Fitting Sizes WNR 1.4876 Seamless Fitting: 1/2" - 10"
ASME B16 9 Incoloy 800Ht Welded Fitting: 1/2" - 48"
Nickel Alloy 800 Fittings Type Manufacturer DN15-DN1200
Bending Radius Provided By Manufacturer R=1D, 3D, 2D, 5D, 8D, 6D, 10D or Custom ASTM B366 UNS N08800 Fitting
Size Range ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) Nickel Alloy 800H Welded Fitting
Incoloy 800 Pipe Fittings Connection Welding
ASME B16.9 UNS N08800 Semaless Fitting Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Alloy 800 Fittings Origin & Mills European, Japanese, USA, Korean, Ukraine, Indian, Russian
Incoloy 800 Forged Fitting Pressure Rating Threaded end - 3000lb/ 2000lb/ 6000lbs
Socket weld end- 6000/ 3000/ 9000lbs
Nickel 800 Buttweld Pipe Fitting Dimensions ASME B16.28, ASME/ANSI B16.9, BS4504, MSS-SP-43, BS1560, BS4504, BS10
ASME B16.9 Incoloy 800 Buttweld Fittings Manufacturing process Push, Forge, Press, Cast, etc.
Specialized Incoloy 800 Pipe Fitting Manufacturer of Alloy UNS N08800 Stub End, 90º Elbows, Tees, Pipe Cap, Crosses, 45º Elbows, Reducers, Pipe Bend
ASME B16.11 Nickel 825 Threaded Fittings Thread Provided By Manufacturer BSPT, NPT, BSPP
Nickel Alloy 800H Products Manufacturer Half Coupling, Union, Tee, Cross, Coupling, Cap, Outlet, Welding Outlet, Boss, Insert
Nickel Alloy 800 Elbows Manufacturer Angle : 22.5 deg, 45 deg, 30deg, 90 deg, 1.0D, 180 deg, 1.5D, 3D, 2.5D, 2.0D, 4D, 6D, 5D, 7D-40D .
Standard: ASME B16.28, GB, ASME B16.9, MSS SP-75 JISB2311 DIN2605 JISB2312 JISB2313, ASME B16.25, BS, ISO
Dimension Specification MSS SP-79, 95, 83, 97, BS 3799, ASME 16.11
Application of Industrial Incoloy 800 Pipe Fittings
  • Fittings To Connect Tubes and Pipe in Gas, Petroleum, Metallurgy, Chemical, Power, Construction, Shipbuilding etc

Well-known Incoloy 800 Fitting suppliers, wholesalers, distributors, exporters, importers, dealers, stocks, and manufacturers in Mumbai

Nickel 800 Forged Fittings

Nickel 800 Forged Fittings

Incoloy Alloy 800 Forged Tee

Incoloy Alloy 800 Forged Tee

ASTM B366 UNS N08800 Forged Elbow

ASTM B366 UNS N08800 Forged Elbow

Incoloy 800 Socket Weld Full Coupling

Incoloy 800 Socket Weld Full Coupling

WNR 1.4876 Socket Weld Elbow

WNR 1.4876 Socket Weld Elbow

Nickel Alloy 800 SW Tee

Nickel Alloy 800 SW Tee

Manufacturer of forged Incoloy 800 fittings made to ASME B16.9/B16.11/EN 10253-4 and welded ASTM B366 UNS N08800 Buttweld fittings

UNS N08800 Threaded Fittings

UNS N08800 Threaded Fittings

ASME B16.11 Incoloy 800 Threaded Elbow

ASME B16.11 Incoloy 800 Threaded Elbow

Incoloy Alloy 800 Threaded Tee

Incoloy Alloy 800 Threaded Tee

Incoloy 800 Pipe Fittings Price Per Piece in India Alloy 800 Buttweld Fittings Price in INR Nickel 800 Fittings Price in UAE Dirham Incoloy 800H Weld Fittings Price in USD
ASTM B366 Alloy 800 butt weld Cap Per Piece 2252.37 UAE Dirham 110.19 $30
ASTM B366 Grade Wpnic Incoloy 800 Pipe Fittings Per Kg 1501.53 UAE Dirham 73.46 $20
Nickel Alloy ASTM B 366b Gr. Wpnic Elbow Per Piece 1726.76 UAE Dirham 84.48 $23

Please get in touch with us for the most recent Alloy 800 Buttweld Fittings pricing list in Mumbai. Compare our pricing to that of other Indian manufacturers of incoloy 800 pipe fittings.

Normal Size Of Pipe
(inches)
Pipe Sch OD (inch)
Wall
Thick.
(inch)
Temperature(oF)
100 200 300 400 500 600 650 700 750
Allowable Stress(psi)
16700 16700 16700 15500 14400 13500 13200 12900 12600
1" 40 1.315 0.133 2205 2205 2205 2047 1902 1783 1743 1703 1664
80 1.315 0.179 3061 3061 3061 2841 2640 2475 2420 2365 2310
160 1.315 0.250 4493 4493 4493 4170 3874 3632 3552 3471 3390
1 1/2" 40 1.900 0.145 1629 1629 1629 1512 1404 1317 1287 1258 1229
80 1.900 0.200 2303 2303 2303 2138 1986 1862 1821 1779 1738
160 1.900 0.281 3362 3362 3362 3120 2899 2717 2657 2597 2536
2" 40 2.375 0.154 1371 1371 1371 1272 1182 1108 1083 1059 1034
80 2.375 0.218 1985 1985 1985 1843 1712 1605 1569 1534 1498
160 2.375 0.344 3283 3283 3283 3047 2831 2654 2595 2536 2477
3" 40 3.500 0.216 1301 1301 1301 1208 1122 1052 1028 1005 982
80 3.500 0.300 1844 1844 1844 1712 1590 1491 1458 1425 1391
160 3.500 0.438 2787 2787 2787 2587 2403 2253 2203 2153 2103
4" 40 4.500 0.237 1102 1102 1102 1023 950 891 871 851 831
80 4.500 0.337 1596 1596 1596 1482 1377 1291 1262 1233 1204
160 4.500 0.531 2611 2611 2611 2424 2552 2111 2064 2017 1970
5" 40 5.563 0.258 965 965 965 896 832 780 763 746 728
80 5.563 0.375 1428 1428 1428 1325 1231 1154 1129 1103 1077
160 5.563 0.625 2474 2474 2474 2296 2133 2000 1955 1911 1866
6" 40 6.625 0.280 877 877 877 814 756 709 693 677 661
80 6.625 0.432 1379 1379 1379 1280 1189 1115 1090 1065 1040
160 6.625 0.719 2382 2382 2382 2211 2054 1925 1883 1840 1797
8" 40 8.625 0.322 771 771 771 716 665 623 610 596 582
80 8.625 0.500 1218 1218 1218 1131 1050 985 963 941 919
160 8.625 0.906 2298 2298 2298 2133 1982 1858 1817 1775 1734
10" 40 10.750 0.365 699 699 699 649 603 565 553 540 528
80 10.750 0.594 1159 1159 1159 1075 999 937 916 895 874
160 10.750 1.125 2289 2289 2289 2124 1974 1850 1809 1768 1727
Indian manufacturer of 3R Elbows, DIN 1.4876 Long Radius Elbows, and Incoloy 800 Short Radius Elbows
Nominal Pipe Size Outside Diameter 90° Elbows 45° Elbows 180° Returns
(inches) Long Radius Short Radius Long Radius Long Radius
(mm) (inches) Center to Face
(inches)
Center to Face
(inches)
Center to Face
(inches)
Radius
(inches)
Center to Center
(inches)
Back to face
(inches)
1/2 21.3 0.840 1 1/2 - 5/8 2 1 7/8
3/4 26.7 1.050 1 1/8 - 7/16 2 1/4 1 11/16
1 33.4 1.315 1 1/2 1 7/8 3 2 3/16
1 1/4 42.2 1.660 1 7/8 1 1/4 1 3 3/4 2 3/4
1 1/2 48.3 1.900 2 1/4 1 1/2 1 1/8 3 4 1/2 3 1/4
2 60.3 2.375 3 2 1 3/8 4 6 4 3/16
2 1/2 73.0 2.875 3 3/4 2 1/2 1 3/4 5 7 1/2 5 3/16
3 88.9 3.500 4 1/2 3 2 6 9 6 1/4
3 1/2 101.6 4.000 5 1/4 3 1/2 2 1/4 7 10 1/2 7 1/4
4 114.3 4.500 6 4 2 1/2 8 12 8 1/4
5 141.3 5.563 7 1/2 5 3 1/8 10 15 10 5/16
6 168.3 6.625 9 6 3 3/4 12 18 12 5/16
8 219.1 8.625 12 8 5 12 24 16 5/16
10 273.1 10.750 15 10 6 1/4 15 30 20 3/8
12 323.9 12.750 18 12 7 1/2 18 36 24 3/8
Grade Al Ti C Mn Si S Cu Fe Ni Cr
800 0.15 – 0.60 0.15 – 0.60 0.10 max 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00
Element Yield Strength (0.2%Offset) Density Melting Point Tensile Strength Elongation
800 / 800H / 800HT 7.94 g/cm3 Psi – 30,000 , MPa – 205 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 30 %
STANDARD UNS JIS BS GOST EN OR WERKSTOFF NR. AFNOR
Incoloy 800 N08800 NCF 800 NA 15 ЭИ670 X10NiCrAlTi32-20 XH32T 1.4876 Z8NC32-21
ASME SB366 800 Incoloy 90° Short Radius Elbow

ASME SB366 800 Incoloy 90° Short Radius Elbow

SCH XXS Incoloy 800Ht Lap Joint Stub Ends

SCH XXS Incoloy 800Ht Lap Joint Stub Ends

Nickel Alloy 800 Equal Tee

Nickel Alloy 800 Equal Tee

450 NB SCH 40 Incoloy 800H Equal Cross

450 NB SCH 40 Incoloy 800H Equal Cross

Werkstoff Nr. 1.4876 90° Long Radius Elbow

Werkstoff Nr. 1.4876 90° Long Radius Elbow

SCH XS ASTM B366 UNS N08800 Stub End

SCH XS ASTM B366 UNS N08800 Stub End

Alloy UNS N08800 Pipe Nipples

Alloy UNS N08800 Pipe Nipples

SCH 140 Incoloy 800 Straight Tees and Crosses

SCH 140 Incoloy 800 Straight Tees and Crosses

Nickel Alloy 800 180° Short Radius Elbow

Nickel Alloy 800 180° Short Radius Elbow

Nickel 800 3D Elbow

Nickel 800 3D Elbow

SCH 160 ASME SB366 800 Incoloy End Cap

SCH 160 ASME SB366 800 Incoloy End Cap

UNS N08800 Eccentric Reducer

UNS N08800 Eccentric Reducer

SCH STD WNR 1.4876 Reducing Nipple

SCH STD WNR 1.4876 Reducing Nipple

UNS N08800 Welded Elbows

UNS N08800 Welded Elbows

SCH 80 Alloy 800 Reducing Tee

SCH 80 Alloy 800 Reducing Tee

Nickel 800 Swage Nipple

Nickel 800 Swage Nipple

ASTM B366 UNS N08800 Long Stubend

ASTM B366 UNS N08800 Long Stubend

Incoloy 800 Seamless Buttwelding 180° Returns

Incoloy 800 Seamless Buttwelding 180° Returns

Incoloy Alloy 800 Pipe Cap

Incoloy Alloy 800 Pipe Cap

Incoloy Alloy 800 Barrel Nipple

Incoloy Alloy 800 Barrel Nipple

SCH 10 Nickel Alloy 800H 10D ELBOW

SCH 10 Nickel Alloy 800H 10D ELBOW

ASTM B366 UNS N08800 Reducing Cross

ASTM B366 UNS N08800 Reducing Cross

Alloy 800 45° Short Radius Elbow

Alloy 800 45° Short Radius Elbow

WNR 1.4876 Long Radius Bend

WNR 1.4876 Long Radius Bend

SCH 60 ASME SB366 800 Incoloy Collar

SCH 60 ASME SB366 800 Incoloy Collar

Nickel Alloy 800 Concentric Reducer

Nickel Alloy 800 Concentric Reducer

15 NB SCH 100 Incoloy 800H Bend

15 NB SCH 100 Incoloy 800H Bend

Incoloy 800Ht 1D Elbow

Incoloy 800Ht 1D Elbow

SCH 120 Alloy UNS N08800 180° Long Radius Elbow

SCH 120 Alloy UNS N08800 180° Long Radius Elbow

UNS N08800 Reducers

UNS N08800 Reducers

SCH 30 Incoloy Alloy 800 5D Elbow

SCH 30 Incoloy Alloy 800 5D Elbow

Incoloy 800 Short Stubend

Incoloy 800 Short Stubend

SCH 20 Nickel Alloy 800H Seamless Buttwelding 45° and 90° Elbows

SCH 20 Nickel Alloy 800H Seamless Buttwelding 45° and 90° Elbows

Alloy UNS N08800 1.5D Elbow

Alloy UNS N08800 1.5D Elbow

Werkstoff Nr. 1.4876 45° Long Radius Elbow

Werkstoff Nr. 1.4876 45° Long Radius Elbow

Nickel Alloy 800H Reducing Outlet Tees and Reducing Outlet Crosses

Nickel Alloy 800H Reducing Outlet Tees and Reducing Outlet Crosses

Incoloy 800Ht Socket Weld Fittings

Incoloy 800Ht Socket Weld Fittings

Nickel 800Ht Forged Fittings

Nickel 800Ht Forged Fittings

Alloy 800Ht Forged Tee

Alloy 800Ht Forged Tee

NCF 800HT Threaded Fittings

NCF 800HT Threaded Fittings

Incoloy Alloy 800Ht Buttweld Fittings

Incoloy Alloy 800Ht Buttweld Fittings

UNS N08811 Buttweld Elbow

UNS N08811 Buttweld Elbow

Incoloy 800H Socket Weld Fittings

Incoloy 800H Socket Weld Fittings

Alloy 800H Forged Fittings

Alloy 800H Forged Fittings

DIN 1.4958 Buttweld Elbow

DIN 1.4958 Buttweld Elbow

Nickel 800H Forged Tee

Nickel 800H Forged Tee

Incoloy Alloy 800H Threaded Fittings

Incoloy Alloy 800H Threaded Fittings

UNS N08810 Buttweld Fittings

UNS N08810 Buttweld Fittings

Ultrasonic testing, Eddy current testing, and ASME SB 366 UNS N08800 Pipe Cap are all offered by the manufacturer of Incoloy 800 Equal/ Unequal Tee.

Alloy 800 Forged Fittings Dimensions

NPS Socket
Bore
Depth
Socket
Bore
DIA
Socket
WT
Body
WT
B J D C G
1/2 21.95
21.70
10 16.6
15
4.65
4.10
3.75
3/4 27.30
27.05
13 21.7
20.2
4.90
4.25
3.90
1 34.05
33.80
13 27.4
25.9
5.70
5.00
4.55
1.1/4 42.80
42.55
13 35.8
34.3
6.05
5.30
4.85
1.1/2 48.90
48.65
13 41.7
40.1
6.35
5.55
5.10
2 61.35
61.10
16 53.5
51.7
6.95
6.05
5.55
2.1/2 74.20
73.80
16 64.2
61.2
8.75
7.65
7.00
3 90.15
89.80
16 79.5
46.4
9.50
8.30
7.60
4 115.80
115.45
19 103.8
100.7
10.70
9.35
8.55
Nominal Size SCH20 STD SCH40S SCH80S SCH120 SCH160
DN NPS
15 1/2 0.08 0.08 0.1
20 3/4 0.17 0.17 0.2
25 1 0.21 0.21 0.25 0.22
32 1 1/4 0.29 0.29 0.35
40 1 1/2 0.42 0.42 0.58 0.6
50 2 0.8 0.8 1.03 1.04
65 2 1/2 1.05 1.05 1.42 1.65
80 3 1.36 1.36 1.9
90 3 1/2 1.63 1.63 2.27 2.4
100 4 2.77 2.77 3.93 4.4
125 5 3.96 3.96 6 7.14
150 6 6.31 6.31 9.26 10.8
200 8 7.85 10.7 10.7 17.5 15 18.4
250 10 11.2 15.8 16.3 25.1 25.1 32.5
300 12 25.6 28.8 32.1 56.5 41.7 53.3
350 14 30.5 38.5 48.8 79 84.5 106
400 16 35.2 44.5 64.3 102 112 143
450 18 62.7 62.7 98.5 165
500 20 72.6 72.6 181
550 22 97 79.1 142 226
600 24 130 100
Nominal
Pipe Size
Outside
Diameter
Reducers
Reduced from
(inches)
(inches) (mm) Concentric & Eccentric Length
(inches)
Reduced to
(inches)
1/2 0.840 21.3 1 1/2 1/4
1 1/2 3/8
3/4 1.050 26.7 2 3/8
2 1/2
1 1.315 33.4 2 3/8
2 1/2
2 3/4
1 1/4 1.660 42.2 2 1/2
2 3/4
2 1
1 1/2 1.900 48.3 2 1/2 1/2
2 1/2 3/4
2 1/2 1
2 1/2 1 1/4
2 2.375 60.3 3 3/4
3 1
3 1 1/4
3 1 1/2
2 1/2 2.875 73.0 3 1/2 1
3 1/2 1 1/4
3 1/2 1 1/2
3 1/2 2
3 3.500 88.9 3 1/2 1
3 1/2 1 1/2
3 1/2 2
3 1/2 2 1/2
3 1/2 4.000 101.6 4 1 1/4
4 1 1/2
4 2
4 2 1/2
4 3
4 4.500 114.3 4 1 1/2
4 2
4 2 1/2
4 3
4 3 1/2
5 5.563 141.3 5 2
5 2 1/2
5 3
5 3 1/2
5 4
6 6.625 168.3 5 1/2 2 1/2
5 1/2 3
5 1/2 3 1/2
5 1/2 4
5 1/2 5
8 8.625 219.1 6 3
6 3 1/2
6 4
6 5
6 6
10 10.750 273.1 7 4
7 5
7 6
7 8
12 12.750 323.9 8 5
8 6
8 8
8 10

Nickel Alloy 800 Tee Dimensions

NOMINAL PIPE SIZE LENGTH CENTER TO END OUTSIDE DIAMETER
Inch. M C OD
1/2 25 25 21.3
3/4 29 29 26.7
1 38 38 33.4
1 1/4 48 48 42.2
1 1/2 57 57 48.3
2 64 64 60.3
2 1/2 76 76 73
3 86 86 88.9
3 1/2 95 95 101.6
4 105 105 114.3
5 124 124 141.3
6 143 143 168.3
8 178 178 219.1
10 216 216 273.1
12 254 254 323.9
14 279 279 355.6
16 305 305 406.4
18 343 343 457.2
20 381 381 508
22 419 419 559
24 432 432 610
26 495 495 660
28 521 521 711
30 559 559 762
32 597 597 813
34 635 635 864
36 673 673 914
38 711 711 965
40 749 749 1016
42 711 762 1067
44 762 813 1118
46 800 851 1168
48 838 889 1219

Incoloy 800Ht Threaded Cap Dimensions

NPS End to End Outside Diameter Minimum End Wall Thickness Min Length of Thread
A D G B J
1/2 32 28 6.4 10.9 13.6
3/4 37 35. 6.4 12.7 13.9
1 41 44 9.7 14.7 17.3
1.1/4 44 57 9.7 17 18
1.1/2 44 64 11.2 17.8 18.4
2 48 76 12.7 19 19.2
2.1/2 60 92 15.7 23.6 28.9
3 65 108 19 25.9 30.5
4 68 140 22.4 27.7 33
Hot working Temperature 871-1232°C (1600-2250°F)
  • Chemical processing
  • Pollution control
  • Calorifiers
  • Oil and gas recovery
  • Nuclear fuel reprocessing
  • Radioactive waste handling
  • Marine exhaust systems
  • High temperature strength
  • High creep rupture strength
  • Resistant to oxidation
  • Good corrosion resistance in acidic environments
ASME SB366 UNS N08800 Short Radius Elbow

ASME SB366 UNS N08800 SR Elbow

Kuala Lumpur, Poland, Tehran -Iran, Qatar, Indonesia, South Korea, United States, Dubai

800ht Incoloy Buttweld Pipe Fittings

800ht Incoloy Buttweld Pipe Fittings

Malaysia, France, Jakarta -Indonesia, Romania Dubai- UAE, Iran, Netherlands, Singapore

Nickel Alloy 800 Concentric Reducer

Nickel Alloy 800 Concentric Reducer

Chile, South Africa, Malaysia, Kuwait, Europe, Vietnam, Czechia, Norway, Belgium, Germany, Nigeria

800 Incoloy Buttweld Fittings

800 Incoloy Buttweld Fittings

Istanbul- Turkey, Argentina, NY 12203 (USA), Bahrain, Oman, Bangladesh, Finland, Jakarta, Hong Kong, Brazil

ASTM B366 800H Incoloy End Cap

ASTM B366 800H Incoloy End Cap

Japan, United Kingdom (UK), Ellington -United States, Spain, Saudi Arabia (KSA), Malaysia, USA, Thailand

Incoloy 800Ht 45 deg elbow

Incoloy 800Ht 45 deg elbow

Canada, Austria, Turkey, Philippines, Los Alamos -Mexico, Dammam -KSA, Greece, Singapore