ASTM A182 F9 Flanges

  • Home /
  • ASTM A182 F9 Flanges

Alloy Steel F9 Slip On Flanges and SA 182 Gr F9 Blind Flange manufacturer in India


What is ASTM A182 F9 Flange?
The F9 grade alloy steel is defined by ASTM A182 F9, which is essentially a forging material specification. F9 grade alloy steel is primarily utilised to create flanges for use in a variety of high temperature and high pressure applications. Chromium and molybdenum are added to the steel alloy to increase its ductility. Among the mechanical characteristics of the ASTM A182 F9 Flange are some of the following:

  • High tensile strength
  • Good corrosion resistance
  • Increased hardness
  • Improved toughness

Because the ASTM A182 F9 material is so adaptable, it is utilised in a wide range of industries, including power generation, offshore oil drilling firms, pharmaceuticals, pharma equipment, sea water equipment, heat exchangers, condensers, and chemical equipment. Since they are smaller and more streamlined, they are ideal for small settings. Three alternative flange face types are available for the ASTM A182 F9 flanges, including

  • Raised face flange- It is the most common and widely used in oil and gas pipelines.
  • Ring type joint face flange- they are used for high pressure and high temperature services.
  • Flat face flange- they are used for less critical applications.

SA182 F9 Socket Weld Flange vs A182 F9 Weld Neck Flanges
For small pipes that hold fluids and gases under high pressure, the SA182 F9 Socket Weld Flange is frequently utilised. In order to attach these flanges, the socket end is inserted into the pipe, and the top area is then welded with a fillet weld. This facilitates a smooth bore and improves the passage of gas or liquid inside the pipe. The A182 F9 Weld Neck Flanges are frequently utilised in a number of dangerous circumstances, including high pressure and significant temperature and pressure swings. Additionally, they are employed with fluids that are flammable or dangerous and under high temperature settings. Even when the temperature is below the sub-zero limit, it may still prove to be helpful.

ASTM A182 F9 Flanges

ASTM A182 F9 Flanges

The largest selection of SA 182 F9 Orifice Flanges and Alloy Steel F9 Forged Flanges are offered by A182 Gr F9 Weld Neck Flange Manufacturers in India in Mumbai in Classes 300, 600, and 900.

ASTM A182 Gr F9 Slip on Flange Vs SA 182 F9 Blind Flange
The largest selection of SA 182 F9 Orifice Flanges and Alloy Steel F9 Forged Flanges are offered by A182 Gr F9 Weld Neck Flange Manufacturers in India in Mumbai in Classes 300, 600, and 900.


Size Range 1/2″ to 48″
Test Magnetic particle detector, X-ray detector, Ultrasonic flaw detector, Direct-reading Spectrograph, Hydrostatic testing machine
Origin Japan / West Europe / Indian / USA / Korean
DIN Pressure Calculation 25Bar 40Bar 16Bar 6Bar 10Bar / PN64 PN10 PN25 PN16 PN6 PN40
Chart of Pressure Rating 300 LBS, 2500 LBS, 1500 LBS, 900 LBS, 150 LBS, 600 LBS
JIS 40 K, 16 K, 5K, 10 K, 30 K, 20 K, 63 K
Manufacturer of Connect / Flange Face Type LJF, RF, RTJ, FF, Small Tongue, Large Tongue & Groove
Standards Provided By Manufacturer ISO70051, MSS S44, BS1560-3.1, API7S-43, B16.48, ANSI/ASME B16.5, B16.47 Series A & B, BS4504, JISB2220, ASME/ANSI B16.5/16.36/16.47A/16.47B, API605, BS 10, EN-1092, DIN, API7S-15, EN1092
Manufacturer of GOST, JIS, ANSI, DIN, UNI, BS, AWWA, AS2129, SABS, NFE, EN etc.
UNI / EN 16Bar 6Bar 40Bar 10Bar 25Bar
Common Types By Manufacturer Threaded / Screwed / Forged / Plate
Production technique Used By Manufacturer Heat treated, Forged and machined
Coating Zinc Plated, Anti-rust Paint, Yellow Transparent, Oil Black Paint, Cold and Hot Dip Galvanized
Equipment Pushing Machine, Press machine, Sand-blasting machine, Bending machine, electric bevelling machine etc

Leading wholesalers, suppliers, distributors, importers, dealers, stocks, exporters, and manufacturers of A182 F9 Class 2 Flange in Mumbai.

ASTM A182 F5 Weld Neck Flange Dimensions

Flange NPS H Inside
Diameter
Flat Face
Thickness (T2)
Outside
Diameter
Raised Face
(RF)
Raised Face
(R)
H1 Raised Face
Thickness (T)
T1 Bolt Circle
(BC)
Bolt Hole
(B)
No. of
Bolt Holes
1/2" 1.19" 0.62" 1.82" 3.50" .063" 1.38" 0.84" 1.88" .38" 2.38" .62" 4
1-1/4" 2.31" 1.38" 2.19" 4.62" .063" 2.50" 1.66" 2.25" .56" 3.50" .62" 4
3/4" 1.50" 0.82" 2.00" 3.88" .063" 1.69" 1.05" 2.06" .44" 2.75" .62" 4
1-1/2" 2.56" 1.61" 2.38" 5.00" .063" 2.88" 1.90" 2.44" .62" 3.88" .62" 4
1" 1.94" 1.05" 2.13" 4.25" .063" 2.00" 1.32" 2.19" .50" 3.12" .62" 4
2" 3.06" 2.07" 2.44" 6.00" .063" 3.62" 2.38" 2.50" .69" 4.75" .75" 4
2-1/2" 3.56" 2.47" 2.69" 7.00" .063" 4.12" 2.88" 2.75" .82" 5.50" .75" 4
3" 4.25" 3.07" 2.69" 7.50" .063" 5.00" 3.50" 2.75" .88" 6.00" .75" 4
4" 5.31" 4.03" 2.94" 9.00" .063" 6.19" 4.50" 3.00" .88" 7.50" .75" 8
5" 6.44" 5.05" 3.44" 10.00" .063" 7.31" 5.56" 3.50" .88" 8.50" .88" 8
3-1/2" 4.81" 3.55" 2.75" 8.50" .063" 5.50" 4.00" 2.81" .88" 7.00" .75" 8
6" 7.56" 6.07" 3.44" 11.00" .063" 8.50" 6.63" 3.50" .94" 9.50" .88" 8
8" 9.69" 7.98" 3.94" 13.50" .063" 10.62" 8.63" 4.00" 1.06" 11.75" .88" 8
22" 24.25" 21.25" 5.82" 29.50" .063" 25.25" 22.00" 5.88" 1.75" 27.25" 1.38" 20
10" 12.00" 10.02" 3.94" 16.00" .063" 12.75" 10.75" 4.00" 1.13" 14.25" 1.00" 12
12" 14.38" 12.00" 4.44" 19.00" .063" 15.00" 12.75" 4.50" 1.19" 17.00" 1.00" 12
16" 18.00" 15.25" 4.94" 23.50" .063" 18.50" 16.00" 5.00" 1.38" 21.25" 1.12" 16
18" 19.88" 17.25" 5.44" 25.00" .063" 21.00" 18.00" 5.50" 1.50" 22.75" 1.25" 16
14" 15.75" 13.25" 4.94" 21.00" .063" 16.25" 14.00" 5.00" 1.32" 18.75" 1.12" 12
20" 22.00" 19.25" 5.63" 27.50" .063" 23.00" 20.00" 5.69" 1.63" 25.00" 1.25" 20
24" 26.12" 23.25" 5.94" 32.00" .063" 27.25" 24.00" 6.00" 1.82" 29.50" 1.38" 20

We can rapidly transport F9 Steel Lap Joint Flange and BS10 ASTM A182 Gr F9 Threaded Flange throughout India thanks to our extensive fleet of heavy freight vehicles.

ASTM A182 F9 Blind Flanges Dimensions

Size in Inch Size in mm ISO Stud Size RF Height Outer Dia. RF Dia. Hole Size PCD No of Bolts Bolt Size UNC Flange Thickness RF Stud Length Weight in kg
D A C E B
1/2 15 M20 7 135 34.9 7/8 88.9 4 3/4 30.2 120 3.2
3/4 20 M20 7 140 42.9 7/8 95.2 4 3/4 31.8 125 3.7
1 25 M24 7 160 50.8 1 108 4 7/8 35 140 5
1 1/4 32 M27 7 185 63.5 1 1/8 130.2 4 1 38.1 150 7.8
1 1/2 40 M30 7 205 73 1 1/4 146 4 1 1/8 44.5 170 10.5
2 50 M27 7 235 92.1 1 1/8 171.4 8 1 50.9 180 18
2 1/2 65 M30 7 265 104.8 1 1/4 196.8 8 1 1/8 57.2 195 25.5
3 80 M33 7 305 127 1 3/8 228.6 8 1 1/4 66.7 220 39
4 100 M39 7 355 157.2 1 5/8 273 8 1 1/2 76.2 255 61.5
5 125 M45 7 420 185.7 1 7/8 323.8 8 1 3/4 92.1 300 102
6 150 M52 7 485 215.9 2 1/8 368.3 8 2 108 345 157
8 200 M52 7 550 269.9 2 1/8 438.2 12 2 127 380 241
10 250 M64 7 675 323.8 2 5/8 539.8 12 2 1/2 165.1 490 470
12 300 M72 7 760 381 2 7/8 619.1 12 2 3/4 184.2 540 575

A182 F9 Slip on Flange Dimensions

Size in Inch Size in mm No of Bolts Outer Dia. Hub OD ISO Stud Size Flange Length RF Height Flange Thick. RF Dia. PCD Hole Size Socket Bore Weight in kg
A C D F B E G H
1/2 15 4 90 30 M14 14 2 9.6 34.9 60.3 5/8 22.2 0.8
1 25 4 110 49 M14 16 2 12.7 50.8 79.4 5/8 34.5 0.9
3/4 20 4 100 38 M14 14 2 11.2 42.9 69.9 5/8 27.7 0.9
1 1/4 32 4 115 59 M14 19 2 14.3 63.5 88.9 5/8 43.2 1.4
2 50 4 150 78 M16 24 2 17.5 92.1 120.7 3/4 61.9 2.3
1 1/2 40 4 125 65 M14 21 2 15.9 73 98.4 5/8 49.5 1.4
2 1/2 65 4 180 90 M16 27 2 20.7 104.8 139.7 3/4 74.6 3.2
3 80 4 190 108 M16 29 2 22.3 127 152.4 3/4 90.7 3.7
4 100 8 230 135 M16 32 2 22.3 157.2 190.5 3/4 116.1 5.9
3 1/2 90 8 215 122 M16 30 2 22.3 139.7 177.8 3/4 103.4 5
5 125 8 255 164 M20 35 2 22.3 185.7 215.9 7/8 143.8 6.8
8 200 8 345 246 M20 43 2 27 269.9 298.5 7/8 221.5 13.7
10 250 12 405 305 M24 48 2 28.6 323.8 362 1 276.2 19.5
6 150 8 280 192 M20 38 2 23.9 215.9 241.3 7/8 170.7 8.6
12 300 12 485 365 M24 54 2 30.2 381 431.8 1 327 29
24 600 20 815 663 M33 81 2 46.1 692.2 749.3 1 3/8 616 100
16 400 16 595 457 M27 62 2 35 469.9 539.8 1 1/8 410.5 54
18 450 16 635 505 M30 67 2 38.1 533.4 577.9 1 1/4 461.8 59
14 350 12 535 400 M27 56 2 33.4 412.8 476.3 1 1/8 359.2 41
20 500 20 700 559 M30 71 2 41.3 584.2 635 1 1/4 513.1 75
ASTM A182 Grade F9 Flanges Price Per Piece in India ASTM A182 F9 Flanges Price in INR SA182 F9 Flanges Price in UAE Dirham ASME SA182 F9 Flange Price in USD
SORF FLANGE DN25 SA182 F9 Per Unit 2,417 UAE Dirham 117.46 $31.98
4inch ASTM A182 F9 Steel Blind Flange Per Unit 3401.05 UAE Dirham 165.28 $45
ASTM A182 F9 Steel Flange Per kg 642.42 UAE Dirham 31.22 $8.50

According to ASME B16.5 Standards, Raaj Sagar Steels is an Indian manufacturer of ASTM A182 F9 flanges. Forged SA182 F9 Cl1 flanges are available for a wide range of industrial applications. The price of F9 Alloy Steel Pipe Flanges is approximately this in India.

Temperature °F Class 150 Class 600 Class 1500 Class 400 Class 900 Class 300 Class 2500
-20 to 100 275 1440 3600 960 2160 720 6000
300 205 1080 2700 720 1620 540 4500
200 230 1200 3000 800 1800 600 5000
400 190 995 2485 660 1490 495 4140
600 140 875 2185 580 1310 435 3640
650 125 860 2150 575 1290 430 3580
500 170 930 2330 620 1395 465 3880
700 110 850 2125 565 1275 425 3540
750 95 830 2075 555 1245 415 3460
850 65 790 1980 530 1190 395 3300
800 80 805 2015 540 1210 405 3360
900 50 780 1945 520 1165 390 3240
950 35 765 1910 510 1145 380 3180
1000 20 640 1605 430 965 320 2675
1100 20 515 1285 345 770 255 2145
1150 20 400 995 265 595 200 1655
1050 20 615 1545 410 925 310 2570
1200 20 310 770 205 465 155 1285
1250 20 225 565 150 340 115 945
1300 20 170 430 115 255 85 715
1400 20 95 240 65 145 50 400
1350 20 125 310 80 185 60 515
1450 15 70 170 45 105 35 285
1500 10 55 135 35 80 25 230
Manufacturer of ANSI B16.5 SA182F9 Long Weld Neck Flange and BS 10 Table E/ EN 1092 Raised Face ASTM A182 F9 Alloy Steel Socket Weld Flange in India
NPS (Nominal Pipe Size) Loose (Lap Joint) NPT (Threaded) SORF (Slip On) BLRF (Blind) SWRF (Socket Weld) WRNR (Weld Neck)
½ 1 1 1 2 2 2
1 2 2 2 2 2 3
3 3 3 3 3 3
¾ 2 2 2 2 2 2
3 3 3 4 3 4
8 8 8 7 8 10
2 5 5 5 5 5 6
3 9 9 9 9 9 11.5
4 13 13 13 17 13 16.5
11 12 11 13 11 12
5 15 15 15 20 15 21
8 30 30 30 47 30 42
6 19 19 19 27 19 26
10 43 43 43 70 43 54
24 275 220 220 430 220 268
14 105 90 90 140 90 114
12 64 64 64 123 64 88
16 140 98 106 180 98 140
20 195 165 165 285 165 197
18 160 130 130 220 130 165
22 245 185 185 355 185 225
Nom Pipe Size OD Sch 10 Sch 20 Sch 30 STD Wall Sch 40 Sch 60 EXT Hvy Sch 80 Sch 100 Sch 120 Sch 140 Sch 160 XX Hvy
½ 0.84 0.083 0.109 0.109 0.147 0.147 0.188 0.294
¾ 1.05 0.083 0.113 0.113 0.154 0.154 0.219 0.308
1 1.315 0.109 0.133 0.133 0.179 0.179 0.25 0.358
1 ¼ 1.66 0.109 0.14 0.14 0.191 0.191 0.25 0.382
1 ½ 1.9 0.109 0.145 0.145 0.2 0.2 0.281 0.4
2 2.375 0.109 0.154 0.154 0.218 0.218 0.344 0.436
2 ½ 2.875 0.12 0.203 0.203 0.276 0.276 0.375 0.552
3 3.5 0.12 0.216 0.216 0.3 0.3 0.438 0.6
3 ½ 4 0.12 0.226 0.226 0.318 0.318 0.636
4 4.5 0.12 0.237 0.237 0.337 0.337 0.438 0.531 0.674
5 5.563 0.134 0.258 0.258 0.375 0.375 0.5 0.625 0.75
6 6.625 0.134 0.28 0.28 0.432 0.432 0.562 0.719 0.864
8 8.625 0.148 0.25 0.277 0.322 0.322 0.406 0.5 0.5 0.594 0.719 0.812 0.906 0.875
10 10.75 0.165 0.25 0.307 0.365 0.365 0.5 0.5 0.594 0.719 0.844 1 1.125 1
12 12.75 0.18 0.25 0.33 0.375 0.406 0.562 0.5 0.688 0.844 1 1.125 1.312 1
14 14 0.25 0.312 0.375 0.375 0.438 0.594 0.5 0.75 0.938 1.094 1.25 1.406
16 16 0.25 0.312 0.375 0.375 0.5 0.656 0.5 0.844 1.031 1.219 1.438 1.594
18 18 0.25 0.312 0.438 0.375 0.562 0.75 0.5 0.938 1.156 1.375 1.562 1.781
20 20 0.25 0.375 0.5 0.375 0.594 0.812 0.5 1.031 1.281 1.5 1.75 1.969
22 22 0.25 0.375 0.5
24 24 0.25 0.375 0.562 0.375 0.688 0.969 0.5 1.219 1.531 1.812 2.062 2.344
26 26 0.375 0.5
30 30 0.312 0.5 0.625 0.375 0.5
36 36 0.312 0.5 0.625 0.375 0.75 0.5
40 40 0.375 0.5
42 42 0.375 0.5
48 48 0.375 0.5
Grade Carbon Chromium Silicone Phosphorus Sulfur Manganese Molybdenum
Alloy Steel F9 0.15 max 8-10 0.5-1.0 0.03 0.03 0.3-0.6 0.9-1.1
Tensile Strength Yield Strength (0.2%Offset) Elongation
380 585 20 %
STANDARD DIN WERKSTOFF NR. UNS DIN
Alloy Steel F9 1.7386 K90941 X 12 CrMo 9 1
Check the pressure rating, specifications, and price list for the AS/NZ 4087 Alloy Steel SA182 F9 Plate Flange and the BS4504 PN16 ASTM A182 Gr F9 Spectacle Blind Flange.
Property Temperature Value
Coefficient of thermal expansion 23.0 °C 1.1E-5 - 1.4E-5 1/K
Melting point 1382 - 1529 °C
Specific heat capacity 23.0 °C 448 - 502 J/(kg·K)
Thermal conductivity 23.0 °C 36 - 43 W/(m·K)
15 NB ASTM A182 Gr F9 Slip On Flange

15 NB ASTM A182 Gr F9 Slip On Flange

SA182 F9 SWRF Flanges

SA182 F9 SWRF Flanges

ASTM A182 Gr F9 Nipoflange Flanges

ASTM A182 Gr F9 Nipoflange Flanges

150 LBS SA182 Grade F9 Tongue & Groove Flange

150 LBS SA182 Grade F9 Tongue & Groove Flange

ASME SA182 F9 WNRF Flange

ASME SA182 F9 WNRF Flange

900 LBS ASTM A182 Grade F9 Lapped Joint Flange

900 LBS ASTM A182 Grade F9 Lapped Joint Flange

ASTM A182 Gr F9 Threaded Flange

ASTM A182 Gr F9 Threaded Flange

2500 LBS SA182 Gr F9 Girth Flanges

2500 LBS SA182 Gr F9 Girth Flanges

Alloy Steel F9 Spectacle Blind Flange

Alloy Steel F9 Spectacle Blind Flange

A182 Gr F9 SORF Flanges

A182 Gr F9 SORF Flanges

ASTM A182 Gr F9 Reducing Flanges

ASTM A182 Gr F9 Reducing Flanges

600 LBS ASME SA182 F9 Steel Weld Neck Flange

600 LBS ASME SA182 F9 Steel Weld Neck Flange

ASTM A182 F9 Blind Flange

ASTM A182 F9 Blind Flange

5000 NB A182 Grade F9 Socket Weld Flange

5000 NB A182 Grade F9 Socket Weld Flange

Alloy Steel F9 BLRF Flanges

Alloy Steel F9 BLRF Flanges

1500 LBS A182 F9 Orifice Flanges

1500 LBS A182 F9 Orifice Flanges

ASTM A182 F9 Ring Joint Flange

ASTM A182 F9 Ring Joint Flange

300 LBS ASTM A182 Grade F9 Screwed Flange

300 LBS ASTM A182 Grade F9 Screwed Flange

ASME SA182 F9 Long Weld Neck Flange

ASME SA182 F9 Long Weld Neck Flange

ASTM A182 Gr F9 Expander Flanges

ASTM A182 Gr F9 Expander Flanges

A182 F9 Cl2 Blind Flange

A182 F9 Cl2 Blind Flange

F9 Alloy Steel Pipe Flanges

F9 Alloy Steel Pipe Flanges

A182 F9 Class 2 Flange

A182 F9 Class 2 Flange

SA182 F9 Cl1 Forged Flanges

SA182 F9 Cl1 Forged Flanges

Density 7.8 - 7.9 g/cm³
  • Oil and Gas Industries
  • Cement Industries
  • Chemical Industries
  • Food Processing Industries
  • Pipeline
  • Paper Industries
  • Power Industries
  • Ship Building Industries